Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

Keywords: Kassaklient, Register Unit Client

The configuration of Point of Sale / Register Unit clients is done in the Configuration module, found under the menu settings → Point Of Sale Clients.

It is still possible to configure a register unit as usual under Client Settings, but we have gathered the most common and important client settings under Point Of Sale Clients.

Client name

Is required when creating the configuration and can not be changed after.

Description

A more descriptive name of the client than the client name.

Register unit

Register unit used. Lists Register units of the type Standard register or Cash free register.

If the cash register unit does not show up, make sure that the correct facility is selected for the module.

Receipt printer

The receipt printer used.

Receipt template

Receipt template used.

Control unit

The control unit to be used. For CleanCash, the url, username and password need to be entered.
For ISecure, only numbers are needed.

Enable Hardware Proxy

If Hardware Proxy is to be used, when Hardware Proxy is activated the Type of debit card terminal must be specified. If you use XTC instead, Card transaction controller class needs to be specified

IPCAM

Here the url to the Ipcam image must be entered as well as the username and password.

Portar

Here you can enter all ports that belong to the client, even those that are not directly related to the register unit.

  • Register reader (brp.register.port)
  • Barcode readers (brp.barcode.port)
  • Customer display port (brp.display.port)
  • Reader for order QR codes (brp.order.port)
  • Ports for passage of entrances on sales (brp.entrySale.port) 
  • Ports for login (brp.login.port)
  • Local passage ports (brp.passage.port)






  • No labels