QR Codes

Owned by Roy Hansson
Last updated: Oct 08, 2024 by emilia.stern
4 min read

This functionality allows the user to use their device camera to read a QR-code which then opens up a door or gate with the help of the Go Active! App. The feature includes:

  • Dynamic QR-code together with Gantner GT7 reader. The reader's display can show a dynamic QR-code which allows the user to scan it and enter the facility. 

  • Static QR-code. For readers that doesn’t have a display to show a dynamic QR-code, it is possible to generate a static QR-code which can be printed and posted on a door/gate.

User Flow

 

1.
The QR code scanning for mobile entrance starts with the user tapping on the “key icon” in the explore page.

2.
Then the user will be prompted to select which method they want to use. If “search for nearby entrances” is selected, Bluetooth scanning will be started. And if “scan a QR code” is selected, the user will be directed to the QR code scanner.

3.
Next, the user will be shown a camera view. The user is required to give camera permissions to use this functionality. The user needs to point the camera to the QR code and it will be scanned automatically.

4.
If the user has the sufficient rights to access the door or gate that they are trying to unlock, a success message is shown and the door then opens up. Otherwise they will be presented with an error message letting the user know why they are not allowed to open the door.

Prerequisites

  • Gantner Access App 2.10

  • Gantner Open Card license

  • BRP Mobility app

  • APIserver is required

Settings

Setting

Value / Description

Setting

Value / Description

Entrance via api (Addon)

(usePassageTryApi3)

Yes

Allow entrance from mobile device

(enableMobilePassageTry)

Yes

Enables the “key icon”

Allow mobile checkins

(enableMobileCheckin)

Yes

Enables mobile check-in

Enable scanning QR codes with the mobility app for passage

(qrCodeMobilePassage)

Yes

Enables the QR-code scanner

Check off interval for classes [minutes from start]

(arriveInterval)

A valid interval should be configured to enable the “check-in” button for a class booking

Please note that currently there is no way to disable bluetooth entrance when the QR-code scanner is enabled.

 

Dynamic QR-Code

Gantner GT7 readers can be configured to display a dynamic QR-code (QR-codes which are updated for every passage in contrast to one static QR-code).

Contact BRP-support for help configuring your Gantner GT7 reader to show dynamic QR-codes.

Gantner GT7 Emergency Mode

(TP58199 / 2024.19)

In case the Gantner GT7 reader loses the internet connection and enters offline mode / emergency mode, customers will still be able to open a door or gate through the following steps:

  1. Click on the “key icon” in the explore page of the app > Click on “Scan a QR-code”.

  2. Point the camera to the QR code of the reader and it will be scanned automatically.

  3. The app will then display a PIN-code. Enter this PIN-code on the reader to open the door or gate.

 

 

Static QR-Code

(TP57227 / 2024.19)


For readers that doesn’t have a display to show a dynamic QR-code, it is possible to generate a static QR-code which can be printed and posted on a door/gate. Customers will then be able to scan the QR-code with the GoActive! app to open the door/gate.

The static QR-code can only be generated by BRP staff. Contact our support for further help.